SparkFun Electronics is supplier of electronic kits and components based just outside Boulder Colorado. They were founded in 2003 with the idea that electronics should be more accessible to the average person. Since then, they have grown to become a leader in Do-It-Yourself electronics and open source technology. We have been a supplier of SparkFun in Canada since 2015 and continue to expand our collection of their fine products!
SparkFun products in our shop:
-
30W 110V Soldering Iron – Basic
$22.95This is a very basic fixed temp, quick heating, 30W 110/120 VAC soldering iron. We really enjoy using the more expensive irons, but if you… -
4 Channel Logic Level Converter – Bi-Directional
$4.95Light PacketThe SparkFun bi-directional logic level converter is a small device that safely steps down 5V signals to 3.3V AND steps up 3.3V to 5V at… -
6″ Digital Calipers
$22.95Digital calipers are an absolute essential for any workbench. These premium calipers come with an extra battery and auto shut-off function. Measurements can be taken… -
Alligator Clip
$0.95Light PacketThis high quality alligator clip is perfect for building your own custom alligator cables. The clip will accept up to 16AWG wire (or 14AWG if… -
Artech Digital Multimeter – A5030
$43.95This Smart Digital Multimeter is packed with features; measure AC/DC voltage, AC/DC current, resistance, continuity, capacitance, frequency, temperature, EF, Hz DUTY, and test diodes. Perfect… -
-
-
Blower – Squirrel Cage (12V)
$11.95This DC Blower Fan really moves some air! Pulling about 1Amp @ 12VDC, this blower is rated at 16CFM and has a 33mm outlet. -
Bus Pirate Cable
$8.95Light PacketThis cable is specifically designed for use with the Bus Pirate. The cable features a polarized connector and the leads are terminated with female ends… -
Bus Pirate v3.6a
$44.95Light PacketThe Bus Pirate v3.6a, created by Ian Lesnet, is a troubleshooting tool that communicates between a PC and any embedded device over 1-wire, 2-wire, 3-wire,… -
CAN-BUS Shield
$39.95The SparkFun CAN-BUS Shield provides your Arduino or Redboard with CAN-BUS capabilities. The shield allows you to poll the ECU for information including coolant temperature,… -
Chip Quik No-Clean Flux Pen – 10mL
$15.95This No-Clean flux pen is perfect for all of your soldering, de-soldering, rework, and reflow purposes! Compatible with Lead and Lead-Free solders, this is a… -
EasyDriver – Stepper Motor Driver
$21.95Light PacketThe EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V pulse (or 0 to… -
Flexible Coolant Pipe – 1ft
$3.95What are flexible coolant pipes doing in our catalogue? Well, these are actually used with the SparkFun Third Hand Kit. When alligator clip ends are… -
Flexible Qwiic Cable – Breadboard Jumper 4 Pin
$3.95Light PacketThis 4-wire cable is a little over 150mm / 6" long and fitted with JST-SH female 4-pin connectors on one end and premium Dupont male… -
Flexible Qwiic Cable – Female Jumper 4 Pin
$3.95Light PacketThis 4-wire cable is a little over 150mm / 6″ long and fitted with a JST-SH female 4-pin (Qwiic) connector on one end. The Qwiic… -
-
Heat Sink Compound
$4.95This heat sink compound is composed of 50% silicone, 20% carbon, and 30% metal oxide. It has a thermal conductivity of 1.172 W/(mK), which should… -
-
IC Hook with Pigtail – 5 Pack
$8.00Light PacketSaleHave you ever needed to test an IC after it is soldered in place? This set of 5 cables have an IC Hook / Grabber… -
Lead Free Solder Tube – 15g
$6.95This tube of solder is just the right size to keep in a toolkit. The solder is lead free 96.5/3/0.5 (96.5% tin, 3.0% silver, 0.5%… -
Load Cell – 10kg, Straight Bar (TAL220)
$9.95Light PacketThis straight bar load cell (sometimes called a strain gauge) can translate up to 10kg of pressure (force) into an electrical signal. -
Load Sensor – 50kg
$5.95Light PacketThis load sensor can measure up to 50kg / 110 lbs and is the same type commonly found in digital bathroom scales -
Mini Solder Tube – 63/37 Leaded – 15g
$5.95This tube of solder is just the right size to keep in a toolkit. The solder is leaded 63/37 (63% tin, 37% lead) and features… -
Multimeter Probes – Tweezers
$7.95These tweezer probes connect to your existing instrumentation with shrouded banana connectors and allow you to easily test small parts with one hand. The large… -
OBD-II to DB9 Cable
$15.95With the standard OBDII port on one end, and a DB9 female connector on the other, this cable is designed to allow easy access to… -
Pan/Tilt Bracket Kit
$12.95This specific Pan and tilt kit includes two servos and all of the hardware required to build a basic movable platform for mounting cameras, sensors,… -
Piezo Element – 6.3kHz
$2.95Light PacketA Piezo element comes in handy when you need to detect vibration or a knock. This sensor measures 20mm in diameter and just 0.42mm thick. -
Power Resistor Kit – 25 Pack
$9.95Power resistors are capable of dissipating large amounts of power without damaging themselves. This kit is perfect for testing projects that require large amounts of…