Panel Mount Ethernet Cable


Panel Mount Ethernet Cable

$7.95 $3.00

SKU: CAB-005 - Mfg Part Number:


This short Ethernet Patch cable is very handy when placing an Ethernet device inside of an enclosure. The jack half has two mounting 'ears' with 4-40 screws installed, 1″ inch / 25mm apart. The ears are flexible so the holes don't have to drilled very precisely. Can be used with box walls up to 0.25″ wide. The screws can be put on from the back for 'reverse' mounting if the box thickness is a problem. Entire unit is 12″ long (9″ cabling between jack and RJ45 Ethernet connector).


  • Straight-through extension
  • 24 AWG wires
  • Two 4/40 mounting screws, 24mm apart
  • Panel mount Ethernet 8P socket with Ethernet 8P plug at cable end.
  • 9″ long / 23 cm
  • Plastic “boot” at Ethernet end is 20mm tall x 33mm wide (20mm where it is smaller behind the mounting flange) x 28mm deep

Only 1 left in stock

SKU: CAB-005. Categories: , . Tags: , , , .
Share With: