Momentary Button – Blue LED

$7.95

Momentary Button – Blue LED

$7.95

SKU: BTN-016

Description

These chrome-plated metal buttons are rugged and look great! Simply drill a 16mm hole into any material up to 1/2″ thick and you can fit these in place, there's even a rubber gasket to keep water out of the enclosure. On the front of the button is a flat metal actuator, surrounded by a blue plastic LED ring. On the back there are 3 contacts for the button (common, normally-open and normally-closed) and 2 for the blue LED ring (+ and -). Connect 3 to 6V to the LED to have it light up nicely, there's a built in resistor! If you want to use this with a higher voltage, say 12V or 24V, simply add a 470 ohm resistor in series with the LED connection to keep the LED current at around 20mA.

This button is momentary button, when you press it the 'normally-open' contact shorts to the common contact. When you release the button, it springs open, and the contacts open up again.


Features

  • Drill hole diameter: 16mm
  • Switch contacts: 1 NO, 1 NC
  • Contact resistance: < 50 mOhm
  • Temperature: -20 C to +55 C
  • Electrical life: > 50,000
  • Operating pressure: 1.5 – 2.5 N
  • Switch rating: 3A / 250VDC
  • Material: Chrome-plated brass
  • Insulation resistance: > 1000 Mohm
  • Mechanical life: > 500,000
  • Panel thickness: 1-13mm
  • Lamp rated voltage: 6V


Back In Stock Notification

This item is currently out of stock, but is available for backorder. If you would like to reserve incoming stock, simply add this to your cart and checkout as per normal.

Alternativly, if you would like to be notified when this product is back in stock, simply subscribe to the auto-notification by entering your email address below.

Available on backorder

SKU: BTN-016. Category: . Tags: , .
 
Share With:
google