This solenoid is ideally suited for a door or cabinet lock. The large metal slug is sprung and forced outwards when the solenoid is off and requires power to slide in. The slug itself has a sloped face, allowing doors to close and lock, but not open without powering the solenoid. The slug can be removed and rotated in 90 degree increments with the removal of a couple Phillips screws.
The solenoid has 222.25mm / 8.75” wires terminated with a JST-XH connector. If you are looking for the mating connector, we have the JST-XH Header available as well.
Keep in mind: This will require a fairly decent 9 – 12VDC power supply as this solenoid will draw up to 650mA.
- 9 – 12VDC
- JST-XH connector
- Wire length: 222.25mm / 8.75″
- Up to 650mA current draw.
- Dimensions: 23.6 x 67.5 x 27.6mm (0.9 x 2.7 x 11.1″)
- Weight: 147.71g
Lock Solenoid: http://www.bc-robotics.com/datasheets/lock_style_solenoid.pdf
In stock (can be backordered)