Large Push Pull Solenoid

$24.95

Availability: Low Stock - Only 2 Remaining

Available

SKU: ROB-085 Mfg Part Number: TAU-1040T Category: Tags: ,

Description

This large push pull solenoid is made of a coil of copper wire with an armature (a slug of metal) in the middle. When the coil is energized, the slug is pulled into the center of the coil. This makes the solenoid able to pull (from one end) or push (from the other)

This solenoid in particular is nice and strong, with a 40mm long body and a ‘captive’ armature with a return spring. This means that when activated with up to 12VDC, the solenoid moves and then the voltage is removed it springs back to the original position, which is quite handy. Many lower cost solenoids are only push type or only pull type and may not have a captive armature (it’ll fall out!) or don’t have a return spring. This solenoid has 4xM3 (metric) threaded holes in the bottom for easy mounting.

You will need a fairly good power supply to drive this large push pull solenoid, as a lot of current will rush into the solenoid to charge up the electro-magnet, about 250mA, so don’t try to power it with a 9V battery!

 

Features

  • 5.1 oz / 144 grams
  • Push or pull type with 10 mm throw
  • 6 Newton starting force (12VDC / 50% duty cycle)
  • 12 DC volts
  • DC coil resistance: 12 ohms
  • 40mm long body

 

May We Also Suggestā€¦

1N4001 Diode – 1A 50V
Price: $0.25
 
1N4007 Diode ā€“ 1A 1000V
Price: $0.25
 
60V / 30A MOSFET – N Channel
Price: $3.95
 
M3 Screw Set – 340 pcs
Price: $15.95
 
M3 x 5mm Phillips (Single)
Price: $0.50
 
TIP120 Darlington Transistor
Price: $2.25
 

   

  Difficulty Level

Soldering Skill: N/A
Prototyping Skill: Beginner
Programming Skill: N/A

  Product Certifications

  Product Attributes

Weight: 150 g

  Warranty Policy

This product has a 30 Day Warranty from the date of delivery. The item must not be modified, abused, incorrectly hooked up, or used for purposes outside the original scope of design.

  Return Policy

This product is returnable Within 14 Days of delivery for a store credit. Item must be unopened, unused, and in re-saleable condition.

 
More Information:
For more information on our Warranty and Return Policies, please consult our   Terms of Service
 

Comments

  1. Richard Luxon

    What is the stroke of this solenoid?

    • Chris @ BCR

      10mm on this solenoid

Add a comment

Your email address will not be published. Required fields are marked *