- You cannot add "ALS-PT19 Analog Light Sensor Breakout" to the cart because the product is out of stock.
IR Break Beam Sensor – 5mm LED
$10.95
This IR break beam sensor works by detecting an object breaking a beam of IR light. This particular sensor has a range of up to 50 cm / 20″ and can be used with 3.3 or 5V.
Available
Description
A beam break sensor is a form of occupancy sensor that uses a beam of light to determine whether or not something is between the two sensors. These types of sensors are used in everything from automatic garage doors and alarm systems down to simple wheel encoders.
This particular sensor projects a beam of infrared light which can be picked up by the matching infrared sensitive receiver. These are far more accurate at determining occupancy of a specific location when compared to a PIR sensor. When the beam is blocked, the receiver will change state and read by a microcontroller or used to trigger a relay or other device.
When powered with 5VDC the sensor has a range of up to 50cm, at 3.3V the range will be reduced. The receiver is an open collector transistor, and can sink up to 100mA current. If you wish to read the receiver using a microcontroller a pull up resistor will be required on the signal wire. To make these as easy to use as possible to use, both the emitter and receiver are housed in a small plastic case with mounting hole.
Features
- Emitter: 5mm IR LED
- Operating Voltage: DC 3.3VDC - 5.5VDC
- Output Current: 100mA max sink
- Response Time: <2ms
- Sensing Distance: Up to 50cm
- Operating Current: 20mA @ 5V
- Sensing Angle: 10 degrees
- Cable Length: 250mm
Package Contents
- 1 x IR Emitter
- 1 x IR Receiver
May We Also Suggestā¦
Warranty Policy
This product has a 30 Day Warranty from the date of delivery. The item must not be modified, abused, incorrectly hooked up, or used for purposes outside the original scope of design.
Return Policy
This product is returnable Within 14 Days of delivery for a store credit. Item must be unopened, unused, and in re-saleable condition.
Comments
There are no comments yet.