View cart “3.3V Step-Up Voltage Regulator U1V11F3” has been added to your cart.

3.3V 1A Step-Up/Down Regulator

$8.95

3.3V 1A Step-Up/Down Regulator

$8.95

SKU: REG-004 - Mfg Part Number: 2122

Description

The Pololu step-up/step-down voltage regulator S7V8F3 is a switching regulator (also called a switched-mode power supply (SMPS) or DC-to-DC converter) that uses a buck-boost topology. It takes an input voltage from 2.7 V to 11.8 V and increases or decreases the voltage to a fixed 3.3 V output with a typical efficiency of over 90%. The input voltage can be higher than, lower than, or equal to the set output voltage, and the voltage is regulated to achieve a steady 3.3 V.

This flexibility in input voltage is especially well-suited for battery-powered applications in which the battery voltage begins above the desired output voltage and drops below the target as the battery discharges. Without the typical restriction on the battery voltage staying above the required voltage throughout its life, new battery packs and form factors can be considered.

For example:

  • A 3-cell battery holder, which might have a 4.5 V output with fresh alkalines or a 2.5 V output with partially discharged NiMH cells, can be used with this regulator to power a 3.3 V circuit.
  • A disposable 9 V battery powering a 3.3 V circuit can be discharged to under 3 V instead of cutting out at 4 V, as with typical linear or step-down regulators.
  • In typical applications, this regulator can deliver up to 1 A continuous when the input voltage is higher than 3.3 V (stepping down). When the input voltage is lower than 3.3 V (stepping up), the available current decreases as the difference between the voltages increases


    Features

    • Input voltage: 2.7 V to 11.8 V
    • Typical continuous output current: 500 mA to 1 A across most combinations of input and output voltages
    • Small size: 0.45″ × 0.65″ × 0.1″ (11 × 17 × 3 mm)
    • Power-saving feature maintains high efficiency at low currents (quiescent current is less than 0.2 mA)
    • Integrated over-temperature and short-circuit protection
    • Fixed 3.3V output with +5/-3% accuracy


    Resources

    Specifications
    S7V8F3 Regulator : http://www.pololu.com/product/2122


    Back In Stock Notification

    This item is currently out of stock, but is available for backorder. If you would like to reserve incoming stock, simply add this to your cart and checkout as per normal.

    Alternativly, if you would like to be notified when this product is back in stock, simply subscribe to the auto-notification by entering your email address below.

    Available on backorder

    SKU: REG-004. Categories: , . Tags: , , , , .
     
    Share With:
    google