12″ eTape Liquid Level Sensor

$59.95

12″ eTape Liquid Level Sensor

$59.95

SKU: SEN-076 - Mfg Part Number: PN-12110215TC-12

Description

The eTape Liquid Level Sensor is a solid-state sensor with a resistive output that varies with the level of the fluid. It does away with clunky mechanical floats, and easily interfaces with electronic control systems. The eTape sensor's envelope is compressed by the hydrostatic pressure of the fluid in which it is immersed. This results in a change in resistance that corresponds to the distance from the top of the sensor to the surface of the fluid. The sensor's resistive output is inversely proportional to the height of the liquid: the lower the liquid level, the higher the output resistance; the higher the liquid level, the lower the output resistance.

The connector is included so you don't have to solder directly to the delicate pins: instead, just solder to the connector and plug it onto the sensor. Since the sensor is resistive, it is easy to read it using a microcontroller/Arduino ADC pin.


Features

  • Sensor Length: 14.1″ (358 mm)
  • Thickness: 0.015″ (0.208 mm)
  • Active Sensor Length: 12.6″ (320.7 mm)
  • Sensor Output: 2250Ω empty, 400Ω full, ± 10%
  • Resolution: 0.01 inch (0.25 mm)
  • Width: 1.0″ (25.4mm)
  • Resistance Gradient: 150Ω / inch (59Ω / cm), ± 10%
  • Substrate: Polyethylene Terephthalate (PET)
  • Actuation Depth: Nominal 1 inch (25.4 mm)
  • Temperature Range: 15°F – 140°F (-9°C – 60°C)


Resources


Back In Stock Notification

This item is currently out of stock, but is available for backorder. If you would like to reserve incoming stock, simply add this to your cart and checkout as per normal.

Alternativly, if you would like to be notified when this product is back in stock, simply subscribe to the auto-notification by entering your email address below.

Available on backorder

SKU: SEN-076. Category: . Tags: , , .
 
Share With:
google