HomeNews › New Product Roundup – June 27th

New Product Roundup – June 27th

Welcome back to another weekly new product roundup! In this edition we have ten new products, including several 10mm LEDs. We also have a new Product of the Week at 40% Off. Before we take a look at all the new items, a quick reminder, we are closed on Wednesday July 1st for Canada Day!

 





New Products This Week
SEE   MORE

$27.95

SparkFun Qwiic Thermocouple Amplifier – MCP9600

 

The MCP9600 Breakout is a high accuracy Thermocouple Amplifier equipped with an I2C interface, accessed over the SparFun Qwiic system. Inside the chip are two temperature sensors, one for the thermocouple itself (the hot junction) and one for the chip itself (the cold junction). As a result, the MCP9600 can read both the ambient temperature and the temperature of whatever you're trying to measure! The MCP9600 can do both with a resolution of 0.0625°C, and an accuracy of ±1.5°C (worst-case). The MCP9600 Thermocouple Amplifier is one of many SparkFun Qwiic compatible boards! Simply plug and go... [Read More]

SEE   MORE

$0.95

10mm Green LED – Super Bright

 

These jumbo LEDs are super bright green and sure to get attention! Each LED measures 10mm in diameter and is easy to work with. The forward voltage is 3.2V with a current consumption of 20mA. To use this LED you will need a current limiting resistor; this will vary depending on your input voltage. Typically with a 5V supply we recommend a 100 ohm resistor for a single LED. ... [Read More]

SEE   MORE

$0.95

10mm Red LED – Super Bright

 

These jumbo LEDs are super bright red and sure to get attention! Each LED measures 10mm in diameter and is easy to work with. The forward voltage is 2.0V with a current consumption of 20mA. To use this LED you will need a current limiting resistor; this will vary depending on your input voltage. Typically with a 5V supply we recommend a 180 ohm resistor for a single LED. ... [Read More]

SEE   MORE

$0.95

10mm White LED – Super Bright

 

These jumbo LEDs are super bright white and sure to get attention! Each LED measures 10mm in diameter and is easy to work with. The forward voltage is 3.2V with a current consumption of 20mA. To use this LED you will need a current limiting resistor; this will vary depending on your input voltage. Typically with a 5V supply we recommend a 100 ohm resistor for a single LED. ... [Read More]

SEE   MORE

$0.95

10mm Warm White LED – Super Bright

 

These jumbo LEDs are super bright yellowish warm white (~2700K). Each LED measures 10mm in diameter and is easy to work with. The forward voltage is 3.2V with a current consumption of 20mA. To use this LED you will need a current limiting resistor; this will vary depending on your input voltage... [Read More]

SEE   MORE

$0.95

10mm Yellow LED – Super Bright

 

These jumbo LEDs are bright yellow / amber and sure to get attention! Each LED measures 10mm in diameter and is easy to work with. The forward voltage is 2.2V with a current consumption of 20mA. To use this LED you will need a current limiting resistor; this will vary depending on your input voltage. Typically with a 5V supply we recommend a 150 ohm resistor for a single LED. ... [Read More]

SEE   MORE

$0.95

10mm Orange LED – Super Bright

 

These jumbo LEDs are a deep orange and sure to get attention! Each LED measures 10mm in diameter and is easy to work with. The forward voltage is 2.1V with a current consumption of 20mA. To use this LED you will need a current limiting resistor; this will vary depending on your input voltage. Typically with a 5V supply we recommend a 150 ohm resistor for a single LED. ... [Read More]

SEE   MORE

$0.95

10mm Purple LED

 

These jumbo LEDs are purple and sure to get attention! Each LED measures 10mm in diameter and is easy to work with. The forward voltage is 3.2V with a current consumption of 20mA. To use this LED you will need a current limiting resistor; this will vary depending on your input voltage. Typically with a 5V supply we recommend a 100 ohm resistor for a single LED. ... [Read More]

SEE   MORE

$9.95

Thermocouple Type-K Stainless Steel

 

This is a stainless steel, Type-K Thermocouple probe. A thermocouple works by taking two wires made of dissimilar metals, connecting them at the two ends, and making a temperature gradient between one end and the other (a 'hot' end and a 'cold' one). Once this is achieved, a voltage potential is formed and current flows. One junction is held in the environment where the temperature of interest exists, this is known as the hot junction... [Read More]

SEE   MORE

$0.50

On/Off Button – Black

 

This simple single pole single throw (SPST) On/Off button will latch on when pressed. To shut it off, simply press it again and it will release. The switch has large, easily solderable, terminals and can handle 1.5A at 250VAC. The solder tabs can be folded to fit as needed... [Read More]

Feature Products
Product Of The Week - 40% Off

$4.95

Magnetic Door Switch

 

  This week we have Magnetic Door Switch featured as our Product of the Week. This item is on sale for 40% OFF until Friday at midnight Pacific time - so do not miss out!

Current Promotions
 

Latest Tutorial

Ordering Online With BC Robotics

Ordering online with BC Robotics is easy! The COVID-19 outbreak has resulted in a lot of new people shopping online, so we figured what better time than now for a quick step by step set of instructions for those unfamiliar with ordering online with our website. Whether you are just down the street wanting to pick up an order, or half way around the world, this guide will help you through the process.

Tags:

Leave a Reply