1.75mm PLA Filament for 3D Printers – Glow In The Dark
PLA is the perfect material for anyone new to 3D printing. This material is not as flexible as ABS, making it much more forgiving to work with, and much less prone to warping. PLA also allows for finer detail to be printed and it is non-toxic! This material is top quality and has been tested on numerous printers for compatibility. The filament is made from 100% virgin PLA and is shipped in a vacuum sealed package to ensure quality print material. Best of all: This glows in the dark!
What is PLA?
PLA (Polylactic Acid) thermoplastic filament is a premium grade material derived from renewable resources such as corn. It has low odor and is guaranteed to be free from heavy metals, phthalates or BPA.
What Temperature Should I Run?
Temperatures will vary between printers as not all printers are built the same, but we recommend starting PLA at approximately 210°C for the hot end (extruder) and approximately 45°C for the heated bed (If your printer has one) and adjust from there.
Storing Your Filament
When storing PLA filament for extended periods place it in a resealable bag along with a silica packet or a few grains of rice. This will keep your filament dry & free from any dust or dirt particles & moisture.
- 1KG / 2.2Lb Spool
- Grade A – 100% Virgin Material
- Vacuum Sealed Package
- Spool Diameter: 20.0 cm / ~8″
- 1.75mm diameter ± 0.05mm
- Non-Toxic & Recyclable
- Spool Width: 6.3 cm / 2.5″
- Spool Hole: 5.8 cm / 2.25″
In stock (can be backordered)